Producto
SLPA-N50
The medium-scale PREP system (SLPA-N50) is purposely designed for continuous, industrial mass production of high quality spherical metal powders with the following characteristics:
- Costo razonable para la producción de lotes medianos
- Ergonomía amigable, fácil de operar
- Diseño de interfaz hombre-máquina simple y profesional
- Relatively high fine powders output rate (Max. rotating speed: 30,000rpm)
- Los polvos producidos tienen alta esfericidad (más de 90%) y alta calidad, como polvos de baja porosidad, polvos satélites bajos, alta pureza (bajo aumento de oxígeno, ≤120 ppm) debido a la atomización en la atmósfera de protección inerte.
- Temperatura de fusión ≥2600 ℃, adecuada para la producción de aleaciones de titanio, aceros, superaleaciones,
- Aleaciones refractarias, aleaciones de alta entropía, etc.
SLPA-D30
The small-scale PREP system (SLPA-D30, desktop level) is purposely designed for R&D of novel alloy powders and small batch production of high quality powders with the following characteristics:
- Costo relativamente más bajo para la producción de múltiples lotes pequeños
- Cambio más rápido para la producción de polvo diversificado y en lotes pequeños múltiples (reducción de tiempo)
- Ergonomía amigable, fácil de operar
- Diseño de interfaz hombre-máquina simple y profesional
- Alta tasa de producción de polvos finos debido a la alta velocidad de rotación (hasta 50 000 rpm)
- Los polvos producidos tienen alta esfericidad (más de 95%) y alta calidad, como polvos de baja porosidad, polvos satélites bajos, alta pureza (bajo aumento de oxígeno, ≤100 ppm) debido a la atomización en la atmósfera de protección inerte.
- Puede producir casi todos los polvos metálicos cuyas varillas sean electroconductoras, especialmente para metales refractarios, metales de alta actividad, superaleaciones, etc.
SLPA-N75
The large-scale PREP equipment (SLPA-N75) is purposely designed for continuous, industrial mass production of high quality spherical metal powders with the following characteristics:
- Costo razonable para la producción de lotes grandes
- Ergonomía amigable, fácil de operar
- Diseño de interfaz hombre-máquina simple y profesional
- Relatively lower fine powders output rate (rotating speed up to 22,000rpm)
- Los polvos producidos tienen alta esfericidad (más de 90%) y alta calidad, como polvos de baja porosidad, polvos satélites bajos, alta pureza (bajo aumento de oxígeno, ≤200 ppm) debido a la atomización en la atmósfera de protección inerte.
- Adecuado para la producción de polvos metálicos con punto de fusión ≤2600 ℃
SEBM-T200
Our powder bed selective electron beam melting 3D printing system – T200 is suitable for low-cost rapid printing and forming with the metal powders, such as Ti6Al4V(TC4), Ti600, TiAl intermetallic compounds, copper alloys, stainless steel, high-temperature alloys, refractory metals, high entropy alloys, hard alloys and other materials. The main technical characteristics are as follows:
- Equipped with a high-power and long-life intermittent heating electronic gun, it can quickly preheat a powder bed with a width of 200mm x 200 mm to above 1100 ℃ to achieve the higher dimensional accuracy of formed parts;
- Forming in a vacuum environment results in higher purity and cleanliness of the formed parts;
- The maximum power is 6kW, with higher energy absorption and utilization efficiency (electron beam to material);
- The powder bed temperature is ≥ 1100 ℃, which allows the printed parts to have lower forming thermal stress and residual stress;
- More formable materials, including but not limited to Ti6Al4V(TC4), Ti600, TiAl intermetallic compounds, copper alloys, stainless steel, high-temperature alloys, refractory metals, high entropy alloys, hard alloys, etc.
- The up-to-down powder feeding method is applied, so the powder quantity in the powder bin can be detected in real time;
- Equipped with brand new powder recycling equipment, the powder removing process after printing is more efficient and convenient;
- Our SEBM printing system with independent intellectual property rights can independently adjust process parameters to adapt to the development of different material forming processes.
SEBM-Y150 / Y150Plus
SEBM-Y150/Y150Plus is specially designed for precise manufacturing / printing, such as orthopedic implants, high-precision small parts for aerospace/military/industry, etc, which is also good for the users who want to develop new materials for PBF-SEBM technology with lower cost.
The characteristics of SEBM-Y150/Y150 Plus are as follows:
- can print the parts with metal powders, including but not limited to refractory metals, zirconium alloys, titanium alloys, pure copper, high-temperature alloys, TiAl intermetallic compounds, etc.
- The printing/forming process parameters are open-source;
- The diameter of the beam spot is finer, the forming accuracy is higher, and it is more suitable for the forming of implants with bone trabecular structures;
- The formed parts can be directly separated from the bottom plate without extra machining, effectively avoiding secondary pollution;
- Equipped with active cooling, the cooling speed is increased by 30%, which improves production efficiency;
- Specially suitable for high-quality forming of active, high melting point medical materials such as Ti6Al4V(TC4), CoCrMo, Ta, etc;
- After high-temperature preheating, the powder will bond together with a certain strength, and the parts have little dependence on support. and they can be stacked and printed to achieve the high production efficiency.
SEBM-H400
SEBM-H400 is developed for printing large-size complex parts or seriesly printing small-size and medium-size complex parts with a bigger forming chamber for aerospace/military/industry, etc, which is also good for the users who want to develop new materials for PBF-SEBM technology with lower cost.
The characteristics of SEBM-H400 are as follows:
- can print the parts with metal powders, including but not limited to refractory metals, zirconium alloys, titanium alloys, pure copper, high-temperature alloys, TiAl intermetallic compounds, etc.
- The printing/forming process parameters are open-source;
- The formed parts can be directly separated from the bottom plate without extra machining, effectively avoiding secondary pollution;
- Equipped with active cooling, the cooling speed is increased by 30%, which improves production efficiency;
- Specially suitable for high-quality forming of active, high melting point medical materials such as Ti6Al4V(TC4), CoCrMo, Ta, etc;
- After high-temperature preheating, the powder will bond together with a certain strength, and the parts have little dependence on support. and they can be stacked and printed to achieve the high production efficiency.
Servicio valioso
Además, también podemos proporcionar varillas de materia prima producidas por fusión al vacío para sistemas PREP, producción a medida o en serie.